October 29, 2016 / Astoria Chloe / Kitchens
How to repair kitchen faucet? Don’t call a plumber just because you need to replace your faucet. It is actually a super easy DIY thing if you know how to change a kitchen faucet. Even, if you know how, you will save much money that should be spent on plumbers fee. The money can be used for buying a nice and sophisticated faucet! Let us tell you how to do it!
You will need to buy the new faucet first. This should be matched with your need and budget. You can buy touch faucet, water filter faucet, or other kinds of modern faucet. Once you have bought it, make sure you gather all the equipments. You will need pliers, measure tape, flexible supply lines, basin wrench, plumber’s putty, and adjustable wrench. Then, of course, we really recommend you to read this article on how to change a kitchen faucet. Thus, you won’t be wrong in changing the faucet. Read also best guide to install kitchen recessed lighting.
As a start, you should know how to remove a kitchen faucet. This can be done by turning off the water valves. It is usually placed under the sink. After that, it really is important to open the faucet, thus the residual water inside the pipe can flow out to the sink. Then, you should disconnect the water pipes from the faucet. This can be done using supply lines or pliers. The next step is pulling out the old faucet.
This is really recommended to read the instructions of kitchen faucets installation. It is usually available along the new faucet you buy. Apply plumber’s putty under the faucet’s base. Then, place the faucet in its place. After that, connect the pipes you have removed before. Make sure you strengthen the pipes under the sink to the faucet. Open the valves again. Then, check the water flow by turning on the faucet. This is the end of this how to change a kitchen faucet article.